AmateurRadio.com

With Hamvention already on top of us, I figured I’d throw my two cents worth into the mix with everybody else’s. In this episode of the Everything Ham Radio Podcast, we talk about some of the interesting things that are going to be going on at this years Hamvention at it’s new location in Xenia, OH.

DARA teamed up with The Miami Valley Mesh Alliance (MVMA) to setup a Mesh network on channel -2 at 10 MHz bandwidth.  The SSID is AREDN-10-v3.

We talk about all of my fellow podcasters/youtubers that are there and what they have going on and where they are at.

Lastly, we discussed some of the interesting forum topics that are going on during the weekend. To listen to the episode as well as check out all the links and further information on the topic, check out the show notes at:

http://www.everythinghamradio.com/podcast/69/

Over the past 67 episodes of my podcast, there has been a couple episodes that have really peaked my interest and kind of lit a fire under me to do whatever that topic is myself. Things like APRS back in episode 6, and Broadband Hamnet in episode 29. However, neither of those got me back onto HF. My HF rig has basically gone unused for close to seven years or so and has been in a box for the last three years!!

I honestly have never been big on voice communications on HF. All of the times that I have operated on HF has either been at home calling CQ or looking for someone else calling it or during things like Field Day. At home I rarely got anyone to answer my CQ call; I think I was getting out. During field day it was, basically the exchange and on to the next contact. Neither of these things were very fun to me.

Digital modes, especially thing like PSK31, seem to be right up my alley! So I decided to look for someone that knew something about it, that I could learn from. I finally found Ian Kahn, KM4IK and he agreed to come onto my show and talk to me about it. We had a great conversation and I learned a lot. If you are interested in learning about PSK31, head over to the show notes of the episode, you can listen right on the page, or you can search for Everything Ham Radio on the major podcast directories.

http://www.everythinghamradio.com/podcast/67

So I’m just a few weeks into learning my new Flex 6500. I had sold my old Bencher iambic paddle a few years back when I got the KX3 and its attached keyer. When the Flex arrived, I quickly realized I was missing a paddle except for an old straight key that WA9EIC had given me. My struggles with the straight key are a story for another day. So off to my favorite online swapmeet places…QRZ and QTH.com. I found an ARRL 100 year anniversary Vibroplex! This one only had the serial number engraved and not a callsign, so it was perfect purchase, and a great match with the 6500.

I had played on 40M CW on and off. With the KX3, I’m ashamed to say that I became dependent on the CW decoder. Part of it was my newness to CW, but part of it was that it was so darn easy to use…and pretty darn accurate. With the Flex, there isn’t a built-in decoder. You could use any number of digital programs or a skimmer if you wanted. For now, I’ve sworn those off so I’ve been back to doing CW decoding the old way…with my head.  With the Flex, 40M CW is joy. You get on, look around, and you can SEE people calling CQ just by watching the regular pattern of their signals.

It was a quiet night at the Brown household, and I was up in the shacking playing with the Vibroplex and the 6500. Up around 7.105 was an interesting signal. It wasn’t the purest CQ I’d ever heard, but a nice fist and an interesting chirp. I answered and had a short QSO. I remember it well as the transmitter the ham was using drifted after our second round. The thing went outside my filter….I figured it was QSB, but when I looked up at the panadapter I found him about 500kHz south of where we started! Being new to the Flex, it took me a few seconds to find the RIT. I got him tuned back in and found him on top of another QSO.  I kinda panicked and figured the safest thing to do was tell him he drifted a bit and then sign off  and move to another. No big deal. No harm, no foul!

Well today I get a phone call from my buddy Dennis, KE9UA. Dennis asked if I knew I was on YouTube. What??? Yep, seems that N6TLU had done a video on operating a Lysco 600, and little ole KG9DW was on the other side of his QSO! Well, now I’m famous. Or should I say infamous….

Terry is truly an interesting character, both on the air and in his videos. Here it is, my YouTube CW debut, in a supporting role in “Hammered Ham!”

So I’m just a few weeks into learning my new Flex 6500. I had sold my old Bencher iambic paddle a few years back when I got the KX3 and its attached keyer. When the Flex arrived, I quickly realized I was missing a paddle except for an old straight key that WA9EIC had given me. My struggles with the straight key are a story for another day. So off to my favorite online swapmeet places…QRZ and QTH.com. I found an ARRL 100 year anniversary Vibroplex! This one only had the serial number engraved and not a callsign, so it was perfect purchase, and a great match with the 6500.

I had played on 40M CW on and off. With the KX3, I’m ashamed to say that I became dependent on the CW decoder. Part of it was my newness to CW, but part of it was that it was so darn easy to use…and pretty darn accurate. With the Flex, there isn’t a built-in decoder. You could use any number of digital programs or a skimmer if you wanted. For now, I’ve sworn those off so I’ve been back to doing CW decoding the old way…with my head.  With the Flex, 40M CW is joy. You get on, look around, and you can SEE people calling CQ just by watching the regular pattern of their signals.

It was a quiet night at the Brown household, and I was up in the shacking playing with the Vibroplex and the 6500. Up around 7.105 was an interesting signal. It wasn’t the purest CQ I’d ever heard, but a nice fist and an interesting chirp. I answered and had a short QSO. I remember it well as the transmitter the ham was using drifted after our second round. The thing went outside my filter….I figured it was QSB, but when I looked up at the panadapter I found him about 500kHz south of where we started! Being new to the Flex, it took me a few seconds to find the RIT. I got him tuned back in and found him on top of another QSO.  I kinda panicked and figured the safest thing to do was tell him he drifted a bit and then sign off  and move to another. No big deal. No harm, no foul!

Well today I get a phone call from my buddy Dennis, KE9UA. Dennis asked if I knew I was on YouTube. What??? Yep, seems that N6TLU had done a video on operating a Lysco 600, and little ole KG9DW was on the other side of his QSO! Well, now I’m famous. Or should I say infamous….

Terry is truly an interesting character, both on the air and in his videos. Here it is, my YouTube CW debut, in a supporting role in “Hammered Ham!”

Yesterday I sold all of my HF radios. At this moment, I have zero radios capable of transmitting below 2 meters.

It started off because of an advertisement in QST, and then a visit to AC9S to see his Flex 6700. I became obsessed with SDR, reading everything I could and watching youtube videos of hams around the world. I had to have a panadapter…wait, I need 4 panadapters!

I settled down a bit and got busy with other hobbies for a couple of weeks. A few contacts on PSK31 and CW, and I was back to being hot and heavy on a new radio – and one with all the whiz bang features. So on Friday I emailed Flex Radio with a list of my current HF rigs. Matt got back with me Monday morning with a quote for trading them in that wasn’t too far off the used market value. Well rats…time to get serious or drop this fantasy.

A little back and forth, and then a search of the online swapmeets led me to list my radios for sale online Monday night. By Tuesday morning they all were sold! Yikes! I ended up getting 25% more than the trade-in offer by selling myself, even when I took shipping and PayPal fees into account. So Tuesday afternoon while at the gym I took a break and called up Matt at Flex. I placed my order, and a new rig will be headed my way in the coming days. My old radios went out by UPS this afternoon. I’m currently a VHF/UHF only ham!

I’m hearing of hams that are giving up on HF, or even ham radio entirely due to the band conditions. Not me…I’m doubling down on this hobby by consolidating my HF capabilities into a Flex. I’ll let you know how that works out!

Yesterday I sold all of my HF radios. At this moment, I have zero radios capable of transmitting below 2 meters.

It started off because of an advertisement in QST, and then a visit to AC9S to see his Flex 6700. I became obsessed with SDR, reading everything I could and watching youtube videos of hams around the world. I had to have a panadapter…wait, I need 4 panadapters!

I settled down a bit and got busy with other hobbies for a couple of weeks. A few contacts on PSK31 and CW, and I was back to being hot and heavy on a new radio – and one with all the whiz bang features. So on Friday I emailed Flex Radio with a list of my current HF rigs. Matt got back with me Monday morning with a quote for trading them in that wasn’t too far off the used market value. Well rats…time to get serious or drop this fantasy.

A little back and forth, and then a search of the online swapmeets led me to list my radios for sale online Monday night. By Tuesday morning they all were sold! Yikes! I ended up getting 25% more than the trade-in offer by selling myself, even when I took shipping and PayPal fees into account. So Tuesday afternoon while at the gym I took a break and called up Matt at Flex. I placed my order, and a new rig will be headed my way in the coming days. My old radios went out by UPS this afternoon. I’m currently a VHF/UHF only ham!

I’m hearing of hams that are giving up on HF, or even ham radio entirely due to the band conditions. Not me…I’m doubling down on this hobby by consolidating my HF capabilities into a Flex. I’ll let you know how that works out!

Yesterday I sold all of my HF radios. At this moment, I have zero radios capable of transmitting below 2 meters.

It started off because of an advertisement in QST, and then a visit to AC9S to see his Flex 6700. I became obsessed with SDR, reading everything I could and watching youtube videos of hams around the world. I had to have a panadapter…wait, I need 4 panadapters!

I settled down a bit and got busy with other hobbies for a couple of weeks. A few contacts on PSK31 and CW, and I was back to being hot and heavy on a new radio – and one with all the whiz bang features. So on Friday I emailed Flex Radio with a list of my current HF rigs. Matt got back with me Monday morning with a quote for trading them in that wasn’t too far off the used market value. Well rats…time to get serious or drop this fantasy.

A little back and forth, and then a search of the online swapmeets led me to list my radios for sale online Monday night. By Tuesday morning they all were sold! Yikes! I ended up getting 25% more than the trade-in offer by selling myself, even when I took shipping and PayPal fees into account. So Tuesday afternoon while at the gym I took a break and called up Matt at Flex. I placed my order, and a new rig will be headed my way in the coming days. My old radios went out by UPS this afternoon. I’m currently a VHF/UHF only ham!

I’m hearing of hams that are giving up on HF, or even ham radio entirely due to the band conditions. Not me…I’m doubling down on this hobby by consolidating my HF capabilities into a Flex. I’ll let you know how that works out!