AmateurRadio.com

In my last post I described my QSO with VK2SSI while experimenting with portable antennas in my backyard. Well the reason I was testing portable configurations is because I needed work Cezar, VY0M, from Melville Island, IOTA NA-248, located in the Canadian arctic.  I knew that the scheduled expedition would occur during the week that I was at Philmont Scout Ranch in Cimarron, NM attending a training class and I would be sleeping in a tent for the week. New IOTA's are getting rare for me, with 1,050+ confirmed so I didn't want to miss this one.

I experimented with multiple antennas as I didn't know what I would be allowed to do at the camp. Would I be allowed to put up an antenna in camp? Would I have to find a remote location somewhere else? How long would my batteries last? So my plan was to try a Buddipole vertical first. It was relatively low profile and wouldn't attract a lot of attention. So I set up the station, in my tent, for a dry run.

As luck would have it, there was a 110v plug in my tent, the power intended to power a light and possibly a fan, so exit the batteries and in with the power supply. I set up the vertical and the antenna worked fine. I was using a Yaesu FT-857, which is a very capable radio, especially for portable use.  With 70 watts I worked into Europe with good reports, so I was thinking that I might just get by with this set-up. However, the first day that VY0M came up, he was on SSB. I never heard a peep from him and decided it was time for plan B.

After erecting the vertical, a few around camp inquired about it and everyone thought the radio set-up was cool, so the next afternoon I decided to put up the bright orange Jacktite, 30 ft.  collapsible pole with an end-fed long wire through a 9 to 1 balun. After I got everything connected, I turned on the radio and tuned the antenna with an LDG tuner. Everything looked good, so I checked the spots on my iPhone and Cezar had just moved to CW. I went to 14.040 and there he was with the fluttery signal common to stations in the far northern latitudes. After two or three calls I had him in the log, Victory dance. All the planning had paid off and I had another IOTA in the log.

What a blast ham radio is. Below is video of the set-up, right after I made the QSO. I didn't have the narrow CW filter on the FT-857, so the stations you hear are actually 1 KC up, but you can still hear Cezar's fluttery signal if you listen closely.

 I've written multiple times in this space about the magic of ham radio. It will always be magic to me.

This past weekend I was testing portable configurations for a trip I will be taking to Philmont Scout Ranch in Cimarron, New Mexico next week. I am the President of the Alamo Area Council of the Boy Scouts and will be going through some training there. So, this trip I will not operating from a summit, but rather I need to work an IOTA Island that I need that will  QRV the week I am there.

I use EFHW's from summits all the time, but at QRP power levels, this time I will be running ~100 watts from a battery, so I thought an on air test would be a good idea. I conduct such tests in my backyard "Outdoor Radio Laboratory". I test portable configurations in an outdoor environment to simulate the conditions I will be operating in. I was running ~100 watts from an old Yaesu FT-100D to the EFHW  on a 30' pole tied off in a tree. I was tuning on 17m and I found and was able to work VK2SSI on OC-194, Solitary Island. So a portable to portable QSO would bode well for the capability of the set up.

Below is a video of the set up.


I think I have more fun in my backyard than in my regular shack.

 I've written multiple times in this space about the magic of ham radio. It will always be magic to me.

This past weekend I was testing portable configurations for a trip I will be taking to Philmont Scout Ranch in Cimarron, New Mexico next week. I am the President of the Alamo Area Council of the Boy Scouts and will be going through some training there. So, this trip I will not operating from a summit, but rather I need to work an IOTA Island that I need that will  QRV the week I am there.

I use EFHW's from summits all the time, but at QRP power levels, this time I will be running ~100 watts from a battery, so I thought an on air test would be a good idea. I conduct such tests in my backyard "Outdoor Radio Laboratory". I test portable configurations in an outdoor environment to simulate the conditions I will be operating in. I was running ~100 watts from an old Yaesu FT-100D to the EFHW  on a 30' pole tied off in a tree. I was tuning on 17m and I found and was able to work VK2SSI on OC-194, Solitary Island. So a portable to portable QSO would bode well for the capability of the set up.

Below is a video of the set up.


I think I have more fun in my backyard than in my regular shack.

I think this video will spark memories of what brought you to ham radio. Click on the link below.

I think this video will spark memories of what brought you to ham radio. Click on the link below.

https://www.youtube.com/watch?v=hxU1ZhINaHk