Posts Tagged ‘NN6JA’
Ham Radio Makes Debut on Tim Allen’s TV Show
I’ve only seen one or two episodes of Tim Allen’s new TV Show, Last Man Standing. They looked OK, but they didn’t grab me to where I put it on my must see list. But I will be looking forward to an upcoming episode of the show, that does feature Ham Radio. All of this is according to en article on Southgate’s website.
Tim’s character, Mike Baxter, who’s callsign is KA0XTT, can be seen using his radio in an upcoming episode says Last Man Standing Producer John Amodeo, NN6JA, having a QSO. He says it was all done on the stage. The radios and antennas are inside the sound stage which acts as a large Faraday cage, basically keeping the QSO, radio to radio.
From the Southgate Article:
“We had two Amateur Extra class staff members complete a QSO on 10 meters and we recorded it,” Amodeo explained. “Unfortunately, we were set up on a stage that is basically a Faraday cage. The very QRP signal made it radio-to-radio. We varied the Receiver Incremental Tuning to give it a little extra SSB sound, but I don’t think the signal made it much past the stage walls. The recording will be on the show. We thought our ham viewers would get a kick out of it. Non-hams will think it’s just distorted.”
He went on to share what equipment was in the shack. An ICOM IC-9100 HF/6 meter/2 meter transceiver and an IC-92AD handheld transceiver, both provided to the show courtesy of ICOM America, as well as a Comet CHV-5X HF dipole and GP-1 antenna for 2 meters and 70 cm (courtesy of NCG/Comet). In an episode that aired on January 3rd, you can see DXCC and Worked All States awards on the wall as well as issues of QST and the 2011 ARRL Handbook. Obviously, the producers are adding a lot of details we would notice, but the average viewr wouldn’t. I wonder if Tim Allen would be curious taking a test for his license? I may need to do a new “Celebrity Ham Radio List”. Who would be on YOUR list?
The episode Mike Baxter has a QSO in will air on January 17th. So set your DVR and be ready.
73.
[adrotate group=”2″]