As a EC for our county ARES team and trustee for four repeaters I have used four different brands & models of repeater controllers on Motorola radios. The ID-O-Matic is a top pick for use in Amateur radio or commercial use at bargain price. Easy to program, versatile, small in size and the reliability factor is outstanding. The rebroadcast audio is as good or better than controllers costing 5 times as much! Sine wave foot print is near perfect on cw id. I am currently using three units in our county & will install two more in the next 2 months to replace ageing units. The unit preforms perfectly in all environments. We have never had a lockup in two yrs of heavy use. Two systems are linked via VoIP and delay is adjustable down to minimum hang time for seamless operation. The only addition to the controller that I would like to see is a multi port unit for remote base operation. I would recommend the controller to any group wishing to replace there basic controller due to lock up or poor rebroadcast audio problems.Read full review
Verified purchase: Yes | Condition: New
I have tried to reach Dan to find out why I have no CW. ID. Its been a week and no response from anyone. I need to find out why it is not IDing in cw. I will send it back for reprogramming if necessary. The program Putty will not load up on my computer. I like the product it self , but with out the program being right it cannot be installed the way it is. The voice ID is unreliable. audio cuts out halfway throught the message. I can be reached at home 847-587-7067. I hope to be able to get this resolved so I can give this a good grade.
Verified purchase: Yes | Condition: New
The ID-O-Matic 4 Repeater Controller is a great value; small size, low price, large capability. This unit allows you to connect two ham radios back-to-back creating a standalone VHF/UHF repeater. It can also be used on HF as a foxhunt controller, a beacon, or an ID timer. This controller is universal to almost all radios. It is not designed for any particular model radio. The digital inputs and outputs can be programmed for active high or active low levels. Three pots easily control various audio levels. Unless you are very new to amateur radio the programming options are straight forward and easily understood. The GUI is DOS based and some experience with that operating system will help understand the flow of the programming. It programs fine with Windows XP and Win 7. This controller comes fully assembled and tested. The board layout is well designed and uses quality components. Complete documentation is available online. An optional low cost audio board is available for use with this controller to give voice ID's or other announcements. We have purchased several of these repeater controllers using them with various radios. The result has been consistent and reliable operation in desert temps from the 20's F to 120+ F.Read full review
Verified purchase: Yes | Condition: New
Based on my Motorola M1225 Repeater with Cellwave duplexer, dx engineering 400max coax and non nickle plated N connectors from W5SWL.
Verified purchase: Yes | Condition: New
This IDer/Controller is just the thing for setting up your GMRS repeater using the Motorola GM300/ Maxtrac radios. It is a high quality circuit board that is well laid out, adjustments for CW ID deviation when it triggers during a voice transmission, can be timed to ID at what ever interval you need. I highly recommend this product to anyone setting up a GMRS repeater or someone who wants to have their ID/ callsign transmitted at regular intervals automatically. Customer service is top notch with RadioDan.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Ham Radio Equipment
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Ham Radio Equipment