AmateurRadio.com

Ready for inspection

The MFJ 1788 antenna has arrived I ended up ordering it from DX Engineering and cancelling the order at the local ham store. DX Engineering had the antenna in stock were as the local store was not able to tell me when the antenna would be in….it seemed to be a waiting game. Once ordering the antenna DX Engineering had it at my door in 3 days! I can't say enough about the great service that was provided by DX Engineering. Now having said that……..I have been doing a lot of online reading about 1788 loop and how over and

Capacitor

Control box test

over again they arrived damaged or just not working. Looking at the loop it seemed to be in great shape and externally survived the trip ok. As I looked at the control unit I found one of the  push buttons not working! The  range button that changes the meter from low to the high wattage scale . I opened the control box as I also heard some "rattling" noise from within the unit as well. I found the switch to be defective and in need of changing, the rattling noise was from the battery holder. It was only held in place with two-side tape and as you guess it….there was no holding left on the tape. At this point I had a choice to make:
1. Send the control box back to either MFJ or DX Engineering for repairs?
2. Ask MFJ if it's possible to make the repair myself if they were to send me the part?
I settled on option 2 as I could still use the control box until the switch arrived and not be put on hold until control box was repaired or replaced. (note: I purchased DX Engineering's last unit)

Stepper motor

The control box failed the QC check it was now time to open up the antenna (a must according to magnetic loop user group) The visual inspection looked very good now time to power up the antenna with the control box. With the cover still off the 1788 loop I wanted to make sure the internal capacitor moved freely and stopped when full rotation was reached in both directions.
All was going well until the capacitor was rotating counter clockwise and it just stopped! I then rotated the capacitor in the clockwise direction and back counter clockwise and it worked just fine. After many back and forth rotations the capacitor never acted up…..maybe this was a one off. I emailed MFJ regarding the switch and they are going to mail one to me so I can do the repair. Next is to mount the antenna and see how it performs stay tuned!
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].